TD 202 Specification Turntable section
Drive System
Belt Drive Motor
DC Motor Speed
33 1/3 RPM, 45 RPM Rotation Speed Variation
+/–2% Wow and Flutter
0.2% Signal-to-Noise Ratio
67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF) Platter
Aluminum Die-cast Diameter of Platter
12", 300mm Tonearm section
Alumi tube Type
Static Balance, Straight Effective Arm Length
8.8", 223.6mm Stylus Pressure Range
0 to 4g Supported Cartridge Weight
3.5 to 6.0g Overhang
18.6mm Anti-skating Adjustment
Supported Cartridge section
Type
MM type (Audio-Technica AT-95E) Stylus Construction
Bonded Diamond Frequency Response
20Hz to 20kHz Channel Separation
>18dB Channel Balance
2.5dB Vertical Tracking Angle
20 degrees Supported Load Impedance
47k ohms Output Voltage
2.5mV (1kHz, 3.54cm/sec.) Stylus Pressure
2.0g +/–0.5g Cartridge Weight
5.7g +/–0.5g Head-shell Weight
11g (including Screws, Nuts and Wires)

Analog Output
Connector
RCA Pin jack (Gold-plated) Power
AC 100 to 240V, 50/60Hz Power Consumption
1.5W (less than 0.5W at Standby) Overall Dimensions (W x H x D)
420 x 355x 121mm Weight
Approx. 3.9 kg