With the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series. Visually a true Thorens, the new TD 403 DD features the same proven smooth-running direct drive as the successful TD 402 DD, but sets itself apart from its smaller brother with a more massive 1.4 kg and 22mm-thick Die-cast aluminum platter and the TP 150 audiophile tonearm also used in the new TD 1500 model.
Stable and super silent direct drive,THORENS TP 150 tonearm
Detachable SME Headshell,Pre installed cartridge Ortofon 2 M Blue
Massive 1.4 kg and 22mm-thick Die-cast aluminum platter
Speeds 33-1/3, 45 rpm.,Speed select electronical
the new Thorens TD 1500, which will be operated purely manually, features a sub-chassis that decouples the turntable and tonearm shelf from the motor and frame by means of three conical springs. In contrast to the TD 150, these springs can be adjusted from above through corresponding holes in the platter, which makes correct adjustment much easier.
Sub chassis with three conical springs,Belt drive with polished precision belt
Massive 1.4 kg and 22mm-thick Die-cast aluminum platter
Pre-installed cartridge Ortofon 2 M Bronze,Electronical controlled motor
balanced (XLR) and unbalanced (RCA) output,Thorens precision tonearm TP 150
The TD 102 A opens a completely new chapter in the field of fully automatic turntables from THORENS. The newly developed mechanism of the TD 102 A guarantees the lowest possible frictional resistance of all mechanical components.The unit comes with an also newly developed carbon tonearm, including the preassembled AT VM 95 E cartridge system from Audio Technica, the successor model to the AT 95 E, which has been known and favored by vinyl-friends for many years.
fully automatic,Drive system internal belt,electronically controlled dc motor
Speeds 33-1/3, 45 rpm.,Speed select electronically
Tonearm carbon tonearm TP 72,Cartridge Audio Technica AT VM95E
Shut off automatically,Phono preamplifier moving magnet, switchable.
The THORENS TD 103 A was specially developed for discerning music lovers who do not want to do without the convenience of a fully automatic machine.The proven TP 19-2 tonearm features the finest bearing technology. The bearing play and the coefficient of friction have been significantly reduced compared to its predecessor by using higher quality bearings and the tonearm cables have been upgraded with a better design.
Fully automatic turntable,Pre-installed cartridge Ortofon 2M Red
Detachable headshell,electronically controlled DC-Motor
Speeds 33-1/3, 45, 78 rpm.,Shut off automatically,Anti-Skating Spring
The original TD 124 was introduced in 1957 and has been used for decades in countless broadcast studios around the world.Thorens is now building on this tradition with the completely newly developed TD 124 DD and continues it with innovative technologies. The purist design and basic construction are based on the original, but the height-adjustable aluminium chassis now rests on vibration-damping rubber elements. Instead of the original drive with friction wheel and belt, the new TD 124 DD uses a "High Precision" Direct Drive.
High Precision Direct Drive Motor,Electrical Lift,TP124 Tonearm
Removable Headshell (SME connector),Prepared for SPU Cartridge
Balanced (XLR) and unbalanced (RCA) outputs,External power supply
Anti Skating with a ruby-mounted counterweight,Cartridge optional Thorens - Ortofon SPU 124
Moving Coil Cartridge for TD 124 DD, special version of the famous Ortofon SPU.The THORENS/Ortofon SPU 124 is a special version of the legendary Ortofon SPU sound box, which is designed for optimal.scanning behaviour in combination with the THORENS TD 124 DD drive and the newly developed TP 124 tonearm.
Output voltage at 1000 Hz, 5cm/sec. - 0.5 mV,Channel balance at 1 kHz < 1.5 dB
Channel separation at 1 kHz > 23 dB,Channel separation at 15 kHz > 15 dB
Frequency response 20-20.000 Hz ± 2 dB
Tracking ability at 315Hz at recommended tracking force *) > 70 μm
The Thorens MM Flex is a high performance moving magnet phono preamplifier that can be fitted directly to the rear of your turntable by means of the unique Velcro™ strip. This allows it to be assembled to your turntable without any irreversible modification. Also, thanks to this system, the MM Flex can be removed and re-fitted without the use of tools.
Mode Moving Magnet (MM) ,Gain at 1 kHz 39 dB
Cartridge matching ,(input impedance) 47 kOhms + 220 pF fixed
Frequency response 10 Hz - 50 kHz (-3 dB) ,RIAA curve accuracy ±0.2 dB max
Developed from the ground up, the MM 002 is a clear step forward, offering excellent Moving Magnet sound quality, and exceptionally low noise levels, at a very affordable price point.
Mode Moving Magnet (MM) ,Gain at 1 kHz 40 dB
Cartridge matching (input impedance) 47 kOhms + 220 pF fixed
Frequency response 10 Hz - 50 kHz (-3 dB),RIAA curve accuracy 0.3 dB max
The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat.
Drive System Belt Drive Motor,Thorens TP 71 tonearm,integrated phono stage
DC Motor Speed 33 1/3 RPM, 45 RPM Rotation Speed Variation
Cartridge section MM type (Audio-Technica AT3600) Stylus Construction
Bonded Diamond Frequency Response 20Hz to 20kHz Channel Separation
with integrated phono pre-amplifier,the well crafted, fully automatic TD 170-1 comes equipped with three speeds so it can also play shellac records at 78 rpm (the special stylus/cartridge required is available separately). Owing to its truly easy operation, you can start playing your records right away without having to waste time with finicky alignment work.
Operation fully automatic,Drive System internal flat drive belt, with integrated phono pre-amplifier
Motor electronically controlled DC motor,Speeds 33-1/3, 45, 78 rpm
Speed Select electronically,Tonearm THORENS® TP 18,Pick-up Cartridge Ortofon OM 10
Anti-skating (Bias) by spring (adjustable),Automatic Shut-off mechanically
Plinth and platter have more mass, which in combination with the electronically controlled DC motor enhances the silent running as well as the sound. It therefore doesn’t matter if you prefer the delicate sound of a violin or rather some powerful guitar riffs.
Operation fully automatic,Drive System internal flat drive belt
Motor electronically controlled DC motor,Automatic Shut-off mechanically
Speeds 33-1/3, 45, 78 rpm,Speed Select electronically
Platter 12” / 0.7 kg (aluminium, non-magnetic),Tonearm THORENS® TP 19-1
Pick-up Cartridge Ortofon OM 10,Anti-skating (Bias) by spring (adjustable).
New TD 202 completes the new series of manual plug and play turntables. Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge.
integrated phono stage includes an additional analogue/digital converter with USB out.
Drive System Belt Drive Motor,Static Balance, Straight Effective Arm Length
DC Motor Speed 33 1/3 RPM, 45 RPM Rotation Speed Variation
Cartridge MM type (Audio-Technica AT-95E) Stylus Construction
Bonded Diamond Frequency Response 20Hz to 20kHz Channel Separation.
The Thorens TD 402 DD comes as out of the box solution for easy use. It has got a very silent, innovative direct drive motor in combination with an integrated phono pre amp and auto start and auto stop function.The new tonearm Thorens TP 72 uses a carbon tube, the pre installed cartridge AT VM95 E is mounted in a detachable headshell.
Drive System Direct Drive,Motor DD Motor,Type MM type (Audio-Technica VM95E)
Speed 33 1/3 RPM, 45 RPM,Platter Aluminum Die-cast
Anti-skating Adjustment Supported,Frequency Response 20Hz to 22kHz
The TD 206 and TD 209 turntables are the younger siblings of the revolutionary, multiple-award-winning TD 309. However, they don’t have to live in the shadow of their older brother. Both models are built using only high-quality materials and parts.
Low Noise, Low Voltage electronically speed controlled DC Motor,Cartridge THORENS® TAS 267
Adjustable belt tension for best performance,Two-part aluminium/acrylic platter
New THORENS TP 90 tonearm with precision Japanese bearings
Tonearm adjustable for VTA, azimuth and overhang,Anti-skating (Bias) by magnet
Speeds 33-1/3, 45 rpm,Speed Change Electronic,Platter 12” / 0.9 kg (aluminium/acrylic).
The TD 206 and TD 209 turntables are the younger siblings of the revolutionary, multiple-award-winning TD 309. However, they don’t have to live in the shadow of their older brother. Both models are built using only high-quality materials and parts.
Low Noise, Low Voltage electronically speed controlled DC Motor
Adjustable belt tension for best performance,Two-part aluminium/acrylic platter
Tonearm THORENS® TP 90, Cartridge THORENS® TAS 267
Speeds 33-1/3, 45 rpm,Speed Change Electronic,Anti-skating (Bias) by magnet
The Thorens TD 148A sets the standard for high level full automatic turntables in the market in technology and design. A high quality plinth, a precise glass platter and the new tonearm which is derived from our High End TP 92 prove this.
Fully automatic turntable,Three speed design: 33,3/ 45/ 78 rpm
Polished precision belt,“floating“ Chassis,Glass platter with exact guide
Optimized tonearm,Cartridge Ortofon M2 blue
Thorens TD 1600 combines the brand’s tradition of the past with 21st century’s technology. Externally quite similar to former famous 160 series with classical wooden plinth, two-part platter with inner belt and thick rubber mat, arm board and acrylic dust cover, it contains a lot of innovations inside.
Fully electronically controlled and stabilized AC synchronous motor.Control built into the chassis
Two part platter,Adjustable belt tension,Electronical controlled motor
balanced (XLR) and unbalanced (RCA) output,Tonearm: Thorens TP 92
Speeds: 33-1 / 3, 45 rpm.Switching: electronically,Turntable: 12 "/ 4,2 kg (aluminum)
EISA TURNTABLE 2020-2021!
Thorens TD 1601 combines everything TD 1600 brings with some additional features regarding comfort and connection to amplifiers. Classical wooden plinth, two-part platter with inner belt and thick rubber mat, powerful motor control unit, arm board and acrylic dust cover are expanded by balanced outputs and functions for easier handling.
Contactless auto shut off,Balanced (XLR) and unbalanced (RCA) output
Manual with subchassis, electric lift and limit switch,Two part platter
Fully electronically controlled and stabilized AC synchronous motor. Control built into the chassis.
Speeds: 33-1 / 3, 45 rpm.,Turntable: 12 "/ 4,2 kg (aluminum),Tonearm: Thorens TP 92