kodulehe valmistamine

With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers.

Frequency Response (-6 dB) 41 – 25,000 Hz (Free field),Sensitivity 90 dB

Nominal Impedance 8 ohms,Recommended Amplifier Requirements 60 — 200 W

Our beautifully proportioned  floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size.

Frequency Response (-6 dB) 45 – 25,000 Hz (Free field),Sensitivity 88 dB

Nominal Impedance 8 ohms,Recommended Amplifier Requirements 40 — 120 W

Our renowned C-CAM technology in the new 8" driver guarantees a detailed and powerful listening experience. The Bronze 100 rear Hive II port is designed and tuned to facilitate easy positioning without affecting performance.

Frequency Response (-6 dB) 52 – 25,000 Hz (Free field),Sensitivity 87 dB

Nominal Impedance 8 ohms,Recommended Amplifier Requirements 30 — 100 W

bookshelf loudspeaker is the most compact model in the series and delivers a size-defying audio performance.

Frequency Response 62 – 25,000 Hz,Sensitivity 85 dB

Nominal Impedance 8 ohms,Recommended Amplifier Requirements 20 — 80 W

If you love deep and refined bass notes, the Bronze W10 is a must-have addition to your speaker set-up as every soundscape is effortlessly reinforced by our beautifully designed subwoofer.

Long-throw 10" driver featuring ‘dished’ C-CAM cone,Amplifier Output 220 W
Upper Frequency Limit 50 – 120 Hz with 24 dB/Octave
Class D with high current Switch mode power supply (SMPSU)

It gives a controlled yet powerful audio presentation to immerse you in the action. And, the cabinet’s discreet form ensures it looks good wherever you position it.

Frequency Response 66 – 30,000 Hz,Nominal Impedance 8 ohms

Sensitivity 88 dB,Recommended Amplifier Requirements 30 — 120 W

has a beautiful new form and has been designed to immerse you in compelling surround sound. Our renowned driver technology ensures an unforgettable home cinema performance.

Frequency Response (-6 dB),74 – 30,000 Hz (In room)

Sensitivity (2.83v @ 1m) 86 dB,Nominal Impedance 8 ohms

Recommended Amplifier Requirements 20 — 80 W

Dolby Atmos brings soundtracks to life by surrounding the listener in moving audio that flows with a vivid three-dimensional realism. When you place our Atmos speaker module on top of one of our complementary Bronze speakers, you will experience a new world of audio.

Frequency Response 105 – 30,000 Hz

Sensitivity (2.83v @ 1m) 86 db,Nominal Impedance 8 ohms

Recommended Amplifier Requirements 10 — 60 W

Monitor Audio has all your rear and side channel requirements covered with the Silver FX, a loudspeaker specially designed for 5.1 and 7.1 systems and featuring Monitor Audio’s advanced technology. This wall-mountable compact two-way design offers dual dispersion characteristics for the perfect surround sound set-up.

Frequency Response (-6 dB) 60 Hz – 35 kHz

Sensitivity (1W@1M) 87 dB,Nominal Impedance 8 ohms

Power Handling (RMS) 85 W,Recommended Amplifier Requirements 30 – 85 W
 

Silver 50 may be compact, but it delivers a big sound with impressive scale and dynamics. Prepare to be astounded.

Frequency Response (-6 dB) 52 Hz – 35 kHz

Sensitivity (1W@1M) 87 dB,Nominal Impedance 8 ohms

Power Handling (RMS) 100 W

Recommended Amplifier Requirements 40 – 100 W

The Silver 100 is a serious audiophile speaker capable of producing remarkable resolution, from the most intricate musical scores to the loudest rock concert, with superlative ease
 

Frequency Response (-6 dB) 40 Hz – 35 kHz
Sensitivity (1W@1M) 88 dB,Nominal Impedance 8 ohms
Power Handling (RMS) 120 W

Recommended Amplifier Requirements 40 – 120 W

The Monitor Audio Silver Series subwoofer delivers seismic bass right down to 22 Hz using a powerful, long throw 12-inch driver.

Automatic Position Correction plus automatic room setup feature using microphone for simple system optimisation
USB for firmware updates,Three preset EQ mode settings (Music, Movie, Impact)
Amplifier Power Output 500 W continuous,Powerful 500 W RMS Class-D amplifier

Upper Frequency Limit 40 – 120 Hz variable
 

A pair of Monitor Audio’s unique 5¼-inch C-CAM bass drivers share the duties of delivering bass and mid/bass. Configured as a two-and-a-half way system both electrically and acoustically, you will be amazed at the magical sound quality that this slimline can produce in your home.

Frequency Response (-6 dB) 38 Hz – 35 kHz

Sensitivity (1W@1M) 89 dB,Nominal Impedance 8 ohms
Power Handling (RMS) 150 W
Recommended Amplifier Requirements 60 – 150 W

Dual chamber bass reflex with differential tuning. Twin HiVe II port system.

The Monitor Audio Silver 300 floorstander retains the familiar award-winning configuration of its predecessor, with several crucial improvements to drivers.

Frequency Response (-6 dB) 32 Hz – 35 kHz
Sensitivity (1W@1M) 90 dB,Nominal Impedance 8 ohms

Maximum SPL 116 dBA (pair),Power Handling (RMS) 200 W
Recommended Amplifier Requirements 80 – 200 W

The incredible Silver 500 floorstander from Monitor Audio features a pair of powerful, long-throw 8-inch C-CAM bass drivers in each cabinet, delivering punchy bass right down to an earth-shaking 30 Hz alongside exquisite treble and captivating mid-range. With this masterpiece, we guarantee you won’t need an extra sub to deliver the most demanding music tracks to the full.

Frequency Response (-6 dB) 30 Hz – 35 kHz

Sensitivity (1W@1M) 90 dB,Nominal Impedance 8 ohms

Recommended Amplifier Requirements 80 – 250 W

is ideal for cabinet or shelves. The sealed enclosure ensures it can be positioned up against a wall without any detrimental effects to the performance.

Frequency Response (-3 dB) 60 Hz – 30 kHz

Nominal Impedance 8 ohms,Recommended Amplifier Requirements 20 – 100 W

2 x 51/2” MMP II bass mid-range,1 x 25 mm black C-CAM tweeter.

designed to be placed in a bookshelf type environment and they deliver a surprisingly powerful performance for such small speakers.

Frequency Response 55 Hz – 30 kHz,Nominal Impedance 8 ohms

Recommended Amplifier Requirements 15 – 70 W

Rear ported bass reflex with HiVe II port technology.

are handsome speakers designed to be placed on a bookshelf or mounted on a stand. With their orange bass driver cones and black C-CAM tweeters, they delight both the eyes and the ears.

Frequency Response 44 Hz – 30 kHz,Nominal Impedance 8 ohms

Recommended Amplifier Requirements 30 – 100 W,Crossover Frequency 3.3 kHz

The muscular Monitor MRW-10 powered subwoofer delivers a thunderous bass down to below 30 Hz and offers a totally immersive movie, music, or gaming experience

Upper Frequency Limit Variable 50 – 120 Hz @ 24 dB/Octave

Amplifier Classification Class D with Switch mode PSU 100 W RMS

Bass EQ Profiles:Music / Movie / Impact  ,1 x 10" MMP II long throw driver

The Monitor 200s are equipped with outrigger feet that give a sleeker appearance, take up less floor space and improve the stability of the speaker.

Frequency Response 40 Hz – 30 kHz,Nominal Impedance 8 ohms
Recommended Amplifier Requirements 30 – 120 W

Dual chamber, rear ported bass reflex with HiVe II port technology.

The Monitor 300s are the top-of-the-range speaker and have been designed to give maximum power and performance. Their cabinets house three 61/2" MMP II bass drivers: two dedicated to bass and one to mid-range frequencies.

Frequency Response 35 Hz – 30 kHz,Sensitivity  90 dB

Nominal Impedance 8 ohms,Recommended Amplifier Requirements 40 – 150 W

Dual chamber, rear ported bass reflex with HiVe II port technology

From the towering Bronze Six, the most complete New Bronze speaker, music and home theatre lovers can appreciate the full-range flavour of our forty year design heritage.

The Gold 300 has been engineered to deliver a true audiophile experience. Premium driver technology taken from our flagship Platinum II speakers has been melded with class-leading cabinet construction to produce a speaker designed to last a lifetime.

Frequency Response 30 Hz – 50 kHz,Sensitivity 90 dB

Nominal Impedance 4 Ohms,Power Handling (RMS) 250 W

Recommended Amplifier Requirements 100 – 250 W

A more compact floorstander, the Gold 200 nevertheless delivers full-scale performance. Its three-way design features two 6½" (165 mm) RDT II bass drivers beneath a 2½" (64 mm) C-CAM mid-range driver with a MPD high-frequency transducer module, backed up by dual rear-firing HiVe II ports.

Frequency Response 35 Hz – 50 kHz,Sensitivity 88 dB

Nominal Impedance 4 Ohms.Power Handling (RMS) 200 W

Recommended Amplifier Requirements 80 – 200 W

Amazing as it may seem, the Gold FX's slim wall-hugging profile incorporates no fewer than six drivers.

The Gold 100 is a larger two-way stand mount speaker featuring a 6.5" RST® bass driver and C-CAM® ribbon.

Frequency Response 42 Hz - 60 kHz

Sensitivity (1W@1M) 88 dB

Nominal Impedance (ohms) 8

Power Handling - R.M.S. (W) 120W
 

The Gold W15's sealed enclosure and front-firing driver make it easy to install, and calibration from the front-mounted controls and dimmable LED display is simple.

It’s unlikely you’ll discover a more persuasive speaker than the PL100 II in its price class, but compare the floor-standing PL200 II with its smaller sibling and immediately you’ll notice the effect of four drivers in a larger cabinet

2 x 6 1/2" RDT®II long throw bass drivers
4" RDT II mid-range driver,2 x HiVe®II ports
MPD (Micro Pleated Diaphragm) high frequency transducer designed specifically for Platinum II
Bespoke speaker terminals and footings
Recommended Amplifier Requirements (RMS) 100 - 250W
Sensitivity 90dB,Nominal Impedance 4Ω
Frequency Response 35Hz - 100kHz

Explore the depths and climb to the heights of your music and film favourites with an effortlessness that confirms an inescapable truth: the bigger the Platinum, the more precious the prize.

2 x 8" RDT®II long throw bass drivers
4" RDT II mid-range driver,2 x HiVe®II ports
MPD (Micro Pleated Diaphragm) high frequency transducer designed specifically for Platinum II
Recommended Amplifier Requirements (RMS) 100 - 300W
Frequency Response (-6dB - IEC 268-13) 28Hz - 100kHz
Nominal Impedance 4Ω (4.2Ω min. @ 111Hz)

Measured against its peers, there is no finer audio ambassador than the majestic PL500 II. Here you’ll discover the essence of Platinum II engineering: silken layers of the finest high frequency definition suspended on an explicit midrange, seamlessly underpinned by a deep, clean and responsive bass foundation.

Bespoke speaker terminals and footings
Underhung, edge-wound voice coils: greater driver efficiency and lifelike dynamics, less distortion
Bolt through drivers: clearer sound and cleaner aesthetics
Anti-Resonance Composite (ARC) mid-range housings and baffle components
Frequency Response (-6dB - IEC 268-13) 22Hz - 100kHz
Recommended Amplifier Requirements (RMS) 150 - 400W
Nominal Impedance 4Ω (4.2Ω min. @ 120Hz)
 

Easy to place in-room the PL100 II will nevertheless belie its compact dimensions with a wide open soundstage punctuated by breath-taking dynamics and imaging so stable you can almost touch it.

6 1/2" RDT®II bass / mid driver,Single rear HiVe®II port
Recommended Amplifier Requirements (RMS) 60 - 120W
Frequency Response (-6dB - IEC 268-13) 40Hz - 100kHz
Nominal Impedance 6Ω (4.5Ω min. @ 160Hz)
MPD (Micro Pleated Diaphragm) high frequency transducer designed specifically for Platinum II

The PLW215 II will help you to re-live the air-bending effect of Mother Nature’s own subwoofer within your listening room

Twin 15” C-CAM drivers, triple-suspended for a full 4cm of excursion
A dedicated DSP-controlled amplifier powers each driver
SubConnect software: adjust in-room response using top panel dial or laptop
4 user presets per input, including preset Flat/Music/Movie/Impact modes

Combined 1400W RMS, 2000W Peak (Burst Ratio 1:4 Continuous,)
 

This is theatre on a professional scale but with the authentic presence, detail and texture that only very finest high-end audio design can conjure.

2 x 8" RDT®II long-throw bass drivers,4" RDT II mid-range driver
MPD (Micro Pleated Diaphragm) high frequency transducer designed specifically for Platinum II
2 x HiVe®II ports,New patented 'DCF' (Dynamic Coupling Filter) mechanism for more natural sound
Underhung, edge-wound voice coils: greater driver efficiency and lifelike dynamics, less distortion
Nominal Impedance 4Ω (4.0Ω min. @ 115Hz)
Recommended Amplifier Requirements (RMS) 100 - 250W
Frequency Response (-6dB - IEC 268-13) 32Hz - 100kHz

Now the soundstage is complete, the drama can begin. Between PL200 IIs or PL100 IIs in a multichannel AV system, the PLC150 II will imbue dialogue with a natural intimacy while pans and effects remain stable and supremely consistent.

Single rear HiVe®II port
New patented 'DCF' (Dynamic Coupling Filter) mechanism for more natural sound
Underhung, edge-wound voice coils: greater driver efficiency and lifelike dynamics, less distortion
Bolt through drivers: clearer sound and cleaner aesthetics
Frequency Response 45Hz - 100kHz
Recommended Amplifier Requirements (RMS) 60 - 200W
Nominal Impedance 6Ω (4.5Ω min. @ 170Hz)

For the MR centre, we’ve demolished the limitations of entry-level design by creating a speaker that not only reproduces voice with unfailing accuracy, but extends this performance to accommodate bass frequencies as well.

Power RMS	120W
Sensitivity (2,83V/1 m)	91dB
Frequency range	60Hz – 30kHz
Drivers	2 x 5.5” MMP® II bass mid-range 1 x 1” gold dome C-CAM® tweeter

The diminutive MR1 allows you to enjoy high quality sound in the smallest spaces.

Power RMS	70W
Sensitivity (2,83V/1 m)	88dB
Frequency range	55Hz – 30kHz
Drivers	1 x 5.5” MMP® II bass mid-range 1 x 1” gold dome C-CAM® tweeter

An evolution of the multi-award winning BR2, the MR2 tunes the considerable talents of its forerunner to a new intensity.

Power RMS	100W
Sensitivity (2,83V/1 m)	90dB
Frequency range	42Hz –30kHz
Drivers	1 x 6.5” MMP® II bass mid-range 1 x 1” gold dome C-CAM® tweeter

The MRW-10 subwoofer represents asignificant step up from its predecessor – the highly regarded ASW100. It’s as compactas its forerunner, but more potent in every respect.

Low Frequency Limit 28Hz
Upper Frequency Limit 45 - 150 Hz Variable
Low Pass Filter
12db/octave filter
Amplifier Output 100 watts

Reflecting the spirit and ambition of the Monitor Reference range, the MR4 is a wholesale re-working of the established BR4 floor-standing model.

Power RMS	150W
Sensitivity (2,83V/1 m)	91dB
Frequency range	36Hz – 30kHz
Drivers	1 x 6.5” MMP® II bass driver 1 x 6.5” MMP® II bass mid-range 1 x 1” gold dome C-CAM® tweeter

The most distinguished and compelling of them all, the MR6 adds effortless authority to the long list of Monitor Reference virtues.The MR6’s elegant proportions and excellent aesthetic quality.

Power RMS	150W
Sensitivity (2,83V/1 m)	90dB
Frequency range	33Hz – 30kHz
Drivers	2 x 6.5” MMP® II bass driver 1 x 6.5” MMP® II bass mid-range 1 x 1” gold dome C-CAM® tweeter

The diminutive R45HD is the perfect satellite speaker for front left, centre, right and rear surround sound applications.

Frequency Response: 120 Hz - 20 KHz
Sensitivity (1W@1m): 87 dB
Nominal Impedance:8 Ohms
Power Handling Single (RMS):25 W
System Power Handling (RMS): 50 W
Recommended Amplifier Requirements: 5 - 50 W
 

The R90HD can be installed easily on ceiling or wall using the same high quality angled bracket supplied. Use the optional bespoke RadiusHD stand for floor positions.

Frequency Response: 80 Hz - 35 KHz
Sensitivity (1W@1m): 87 dB
Nominal Impedance:8 Ohms
Power Handling Single (RMS):60 W
System Power Handling (RMS): 100 W
Recommended Amplifier Requirements: 10 - 100 W

The slightly larger and more versatile R180HD offers the same irresistible blend of virtues as the R90HD, but can be installed vertically as a main, side or rear speaker.

Frequency Response: 60 Hz - 35 KHz
Sensitivity (1W@1m): 87 dB
Nominal Impedance:8 Ohms
Power Handling Single (RMS):60 W
System Power Handling (RMS): 100 W
Recommended Amplifier Requirements: 10 - 100 W
 

The R250HD employs the R225HD’s driver configuration in a longer cabinet and extra port providing the enhanced bass performance that makes it a desirable space efficient hi-fi satellite for any room.

Sensitivity (1W@1m): 90 dB
Nominal Impedance:8 Ohms
Power Handling Single (RMS):150 W
System Power Handling (RMS): 100 W
Recommended Amplifier Requirements: 20 - 150 W

The R250HD employs the R225HD’s driver configuration in a longer cabinet and extra port providing the enhanced bass performance that makes it a desirable space efficient hi-fi satellite for any room.

Sensitivity (1W@1m): 90 dB

Nominal Impedance:8 Ohms
Power Handling Single (RMS):100 W
System Power Handling (RMS): 150 W
Recommended Amplifier Requirements: 20 - 150 W
 

The R270HD is a super-slim floor-standing loudspeaker designed for genuine full-range performance in a serious music system or multichannel audio/video system.

Frequency Response: 48 Hz - 35 KHz
Sensitivity (1W@1m): 90 dB
Nominal Impedance:8 Ohms
Power Handling Single (RMS):100 W
System Power Handling (RMS): 150 W
Recommended Amplifier Requirements: 20 - 150 W

This super-compact active subwoofer has the speed, subtlety and pitch accuracy to enhance the highest quality music reproduction but it can also deliver the power and slam demanded by movie soundtracks.

Low Pass Filter Alignment:12dB / Octave variable
Cabinet Specification:Bass reflex - downward firing port.
Amplifier Output (RMS):100 W
Amplifier Classification: Class - A-B amplifier

 

The Radius one HD is a design completely new to Radius. Inspired by the popularity of single box surround sound solutions, Radius one HD gives the format the Monitor Audio treatment.

System Power Handling (RMS):	C: 150 W L/R: 100 W
Recommended Amplifier Requirements:	C: 20 - 150 W L/R: 10 - 100 W

The R370HD active subwoofer provides a new dimension to a system’s sound.

Low Pass Filter Alignment:	12dB / Octave variable +12dB / Octave fixed (2 stage)
Cabinet Specification:	Sealed Cabinet of 18mm (3/4) M.D.F. construction
Amplifier Output (RMS):	250 W
Amplifier Classification:	Class - D Digital amplifier
Driver Complement:	1 x 10" C-CAM® subwoofer driver

The A10 stand will extend the elegant lines of the A10 satellite to the floor, providing a secure, stable and stylish alternative to wall fixing. Its die-cast aluminium plinth and extruded Aluminium support are internally wired with our own Silver Pureflow^® cable so that no manual cable connection with the A10 is required: the speaker simply locates with the connecting forks situated in the low-resonance mounting recess.

As capable with music as it is with home theatre sound, the beautifully bijou A10 punches like a heavyweight, expertly blending sky-wide high frequencies with a natural blast of delicious mid-range detail coupled to a depth of bass that simply defies the A10’s svelte dimensions.

Frequency Response +/- 3dB:	60 Hz - 35 KHz
Sensitivity (1W@1M):	87 dB
Driver Compliment:	1 x 140mm (5 1/2") RST® mid-bass driver 1 x 25mm (1") C-CAM® gold dome tweeter
Nominal Impedance:	8 ohms
Maximum SPL (each):	110.8 dBA
Recommended Amplifier Requirements (RMS):	25 - 100W

The supremely versatile A40 can be used vertically or horizontally to provide electrifying audio realism characterised by soaring dynamics and low distortion.

Frequency Response +/- 3dB:	50Hz - 35KHz
Sensitivity (1W@1M):	90dB
Driver Compliment:	2 x 140mm (5 1/2") C-CAM® mid/bass driver with RST® technology. 1 x 25mm (1") C-CAM® gold dome tweeter.
Nominal Impedance:	8 ohms
Maximum SPL (each):	116.8 dBA
Recommended Amplifier Requirements (RMS):	50 - 200W

Power RMS	120W
Sensitivity (2,83V/1 m)	91dB
Frequency range	60Hz - 22kHz
Drivers	2 x 140mm (5 1/2”) MMP®II mid-bass driver 1 x 25mm (1”) C-CAM® gold dome tweeter
Nominale impedance	8 ohms

Power RMS	70W
Sensitivity (2,83V/1 m)	88dB
Frequency range	55Hz - 22kHz
Drivers	1 x 155mm (5 1/2”) MMP®II mid-bass driver 1 x 25mm (1”) C-CAM® gold dome tweeter
Nominale impedance	6 ohms

Power RMS	100W
Sensitivity (2,83V/1 m)	90dB
Frequency range	42Hz - 22kHz
Drivers	1 x 165mm (6 1/2”) MMP®II mid-bass driver 1 x 25mm (1”) C-CAM® gold dome tweeter
Nominale impedance	6 ohms

Description	Bass Reflex 18mm (3/4”) M.D.F construction
Power RMS	100W (RMS) Class A-B amplifier
Frequency range	28Hz-150Hz
Drivers	1 x 10” long throw subwoofer driver

Power RMS	200W
Sensitivity (2,83V/1 m)	91dB
Frequency range	34Hz - 25kHz
Drivers	2 x 165mm (6 1/2”) MMP®II mid-bass driver 1 x 165mm (6 1/2”) MMP®II bass driver 1 x 25mm (1”) C-CAM® gold dome tweeter
Nominale impedance (EN 600065)	6 ohms